Holiday Shut Down Schedule

Ingersoll Axles annual holiday shut down dates are December 22nd – January 5th 2015.

Happy Holidays,
We will see you in the New Year!

Tire Wear

…it’s the bane of our existence; costly and frustrating.

Watch the video below for some advice from Rudy on what you need to keep in mind and maintain to prevent irregular/premature tire wear on your SmartSteer Axle!


Thank you for reading our blog and stay safe out there!

Toe Setting


Click the video below to watch Rudy give you some instruction and advice on the how to properly and effectively set the toe of your Ingersoll SmartSteer Axle.



If you have any questions or would like to see us feature something specific please sound off in the comments below!

Tires, Tires, Tires…


We’ve come across some long running units out there that are having issues with tire life and irregular wear patterns.

One thing I see all too often when I come out to provide some tech support is that tires are being replaced without matching brand or tread pattern. This is a pretty big no, no. I like to ask mechanics if they would have different tires on the steer axle of their truck or even their own cars.

The slightest change in tire size, diameter or tread pattern can have a pretty significant effect on weight distribution. Proper inflation levels in the tire are just as important. If you want those tires and especially the axles they’re attached to have a nice, long, relatively issue free life then I’d recommend you replace tires together or at least get one that matches the diameter and tread patterns of the one you’re replacing.

If you have any questions don’t hesitate to leave them below or get in touch with us.

Thank you for reading and stay safe out there!

Rudy & Phil out!


Follow us on Twitter!

So you come here to get the latest news on whats happening here in Ingersoll Territory…

Did you know that we have a Twitter account where you can get the latest news also? It’ll even show up on your phone app!

Click the picture below to see our profile and be sure to follow us!

Screen Shot 2014-07-29 at 11.48.10 AM

If you don’t have an account yet its a great time to create one!

How often should I check…?

Disc Brake Axle Inspections

Hey there,

We’ve been receiving some questions as to how often you should be inspecting your disc brake equipped axles.

Recommended practices advise that you should be taking a look at the state of your brake pads and rotors every 5,000km. Some guys like to go a little longer but a good rule of thumb is to check that stuff out every 5,000km to prevent any future issues.

Alignment of your axle should be checked every 20,000 miles / 32,000 km (or 3 months). In that interval its also good to take a look at the brake pad thickness. That’ll help identify if any seizing is happening with the calipers or not.

From there every 50,000 miles / 75,000km (or 6 months) be sure perform a thorough inspection of the entire disc brake unit itself. Again, you want to prevent anything unwanted from happening while on the road.

If you have any questions be sure to leave a comment or drop us a line!

Rudy & Phil out!

Alignment, Adjustment.

Beam Alignment and Wheel-end Adjustment

We’ve prepared a video blog for all of you this week!

This time the focus is on the beam alignment and wheel-end adjustment of your SmartSteer Axle. This was a short clip taken from a training session conducted by Rudy. Feel free to share this amongst your fellow workers/friends.

If you have any questions or would like to see something specific featured in a video or written post please let us know and we’ll get on it.

Take care and stay safe!

Ingersoll Axles @ Truckworld!

Ingersoll Axles is attending Truckworld 2014!

Truckworld is being held from Thursday April 10th until Saturday April 12th at the International Centre in Toronto, ON.

Stop by booth 2444 to chat with us on all the new stuff we’ve got going on here in Ingersoll Territory!

Ingersoll @MATS 2014

Hello there!

Are you attending this year’s Mid America Trucking Show (MATS)?

MATS is the largest heavy-duty trucking event in the world and Ingersoll Territory is here to be a part of it.

Drop by booth #18216 to chat with us on all things trucking and all things Ingersoll Axles.

The event is running from Thursday March 27th until Saturday March 29th at the Kentucky Exposition Center in Louisville, KY. Drop by if you’re attending and bug our guys Phil and Rudy for a bit. They’d be happy to shake your hand and fill you in on what we’ve got cooking in Ingersoll.

All of us from Ingersoll Territory greatly appreciate you taking the time to read our blogs!

We’ll have some awesome content coming your way very soon!

Please wait...
Send a message

Sorry, we aren't online at the moment. Leave a message.

Your name
* Email
* Describe your issue
Login now

Need more help? Save time by starting your support request online.

Your name
* Email
* Describe your issue
We're online!

Help us help you better! Feel free to leave us any additional feedback.

How do you rate our support?